Table 4-29: Federal Exhaust Emission Certification Standards for Newly Manufactured Gasoline- and Diesel-Powered Light-Duty Vehiclesa,b (Grams per mile)
|Engine type and pollutant||Prior to controld||1968-1969||1970-1971||1972||1973-1974||1975-1976||1977-1979||1980||1981||1982-1986||1987-1993||Tier 1i 1994-2003b||Interim Tier 2i 2004-2006||Tier 2i 2007+|
|Useful life, intermediateb,d (full)||h||h||h||h||h||h||h||h||h||h||5 years/50,000 miles||5 years/50,000 miles||5 years/50,000 miles||5 years/50,000 miles||5 years/50,000 miles||5 years/50,000 miles|
|Useful life, intermediateb,d (full)||5 years/50,000 miles||5 years/50,000 miles||5 years/50,000 miles||5 years/50,000 miles||5 years/50,000 miles||5 years/50,000 miles||5 years/50,000 miles||5 years/50,000 miles||5 years/50,000 miles||5 years/50,000 miles||10 years/100,000 miles||10 years/100,000 miles||10 years/100,000 miles||10 years/100,000 miles||10 years/120,000 miles||10 years/120,000 miles|
KEY: CO = carbon monoxide; CVS = constant volume sampler; HC = hydrocarbons; NMHC = non-methane hydrocarbons; NMOG = nonmethane organic gases; NOx = nitrogen oxides.
a The test procedure for measuring exhaust emissions has changed several times over the course of vehicle emissions regulations. The 7-mode procedure was used through model year 1971 and was replaced by the CVS-72 procedure beginning in model year 1972. The CVS-75 procedure became the test procedure as of model year 1975. While it may appear that the total HC and CO standards were relaxed in 1972-74, these standards were actually more stringent due to the more stringent nature of the CVS-72 test procedure. Additional standards for CO and composite standards for NMHC and NOx tested under the new Supplemental Federal Test Procedure will be phased-in beginning with model year 2000; these standards are not shown in this table.
b All emissions standards must be met for a useful life of 5 years/50,000 miles. Beginning with model year 1994, a second set of emissions standards must also be met for a full useful life of 10 years/100,000 miles; these standards are shown in parentheses. Tier 1 exhaust standards were phased-in during 1994-96 at a rate of 40%, 80%, and 100%, respectively.
c The cold CO emissions standard is measured at 20 0F (rather than 75 0F) and is applicable for a 5-year/50,000-mile useful life.
d The "Prior to control" column reports emissions estimates of a typical newly manufactured car in the years before exhaust emissions certification standards were implemented.
e No estimate available.
f Manufacturers can opt to certify vehicles for a full useful life of 15 years/150,000 miles and have either 1) intermediate useful life standards waived or 2) receive additional NOx credits.
g In 1968-69, exhaust emissions standards were issued in parts per million rather than grams per mile and are, therefore, incompatible with this table.
h No standard has been set.
I The term "tier" refers to a level of standards and is associated with specific years. Interim Tier 2 refers to an intermediate level of standards that move manufacturers toward compliance with Tier 2 standards. Interim Tier 2 and Tier 2 standards are established as "bins." Each bin is a set of standards for NOx, CO, NMOG, formaldehyde, and particulate matter; HC and NMHC standards are dropped for Tier 2 and Interim Tier 2. Manufacturers may certify any given vehicle family to any of the bins available for that vehicle class as long as the resulting sales-weight corporate average NOx standard is met for the full useful life of the vehicle. The Tier 2 corporate average NOx standard is 0.07 grams/mile. Interim corporate-based average NOx standards are based on vehicle type. The interim sales-weighted average for light-duty vehicles (LDVs) is 9.3 grams/mile. For LDVs, Tier 2 standards will be phased in at a rate of 25% in 2004, 50% in 2005, 75% in 2006, and 100% in 2007. During this period, all LDVs not meeting the Tier 2 standards must meet Interim Tier 2 standards.
40 CFR 86, Subpart A (July 1, 2000).
Federal Register, Vol. 65, No. 28, pp. 6851-6858.